Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
More pictures would help a lot here. Top, bottom, sides, etc., as well
as a shot with something else in the picture like a ruler so we can get
an idea what the size is.
Wow... To know it's resonant frequency, you have to sweep it witha function generator (sinewave) connected to it across a 600 ohm resistor and observe the waveform with a scope connected directly to the transducer. Please respect the natural use of the transducer (If it's an underwater transducer, put the output port under water).
While sweeping it, you'll notice variations in the sinewave's amplitude. The resonant frequency will be the frequency at which the amplitude will be the LOWEST. (lowest impedance).
thanks for help !
i will tell you about my process
i was repair some ultrasonic clearning and it 's working good .but some machine i can't repair because some component is not found so i want made a new board
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.