I am sort of fooling around with some parts I bought. I have a 350W 24V DC motor and I have a compatible local controller (not sure of the control voltages on the input). I want to set this up to be remotely controlled. Maybe I could use parts from an RC car. They are normally 12V. I thought of putting this on a power wheels for my nephew to control via remote; It prob will require a big frame like that for this big motor and the required batteries. Anyone have any ideas?
two items bought on ebay: 24v 350w controller
"24V 350W brushed speed controller e-bike scooter " (260418813261)
...and 24v 350w motor
"Currie 350 W 24 volt Bike DC Electric Scooter Motor 24v" (120425910336)
(paste the item #'s into the ebay search)
What is the easiest way to control these items. I was suggest to use a micro controller. I see that i can't connect a receiver straight to the controller... what to do...
If you're going to do RC stuff you should probably know the terminology used =) ESC = Electronic Speed Control. You can buy them at hobby stores, just tell them you want a 24 volt ESC for a brushed motor that can handle 20amps. No clue what the stall current on that's gonna be so don't get it bogged down.