Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

CD4024B counter Q

Status
Not open for further replies.
S

Speakerguy

Active Member
Just double-checking, but tying the RESET pin low will result in normal device operation, right? Just making sure it's not like an active-low reset or something. I normally don't use stuff this old :) Thanks!
 
Yes, the datasheet from Texas Instruments says that a high on the Reset pin causes the stages to be reset.
 
Status
Not open for further replies.

Similar threads

G
  • Question
[Solved] Need help regarding for modify decade counter waveform
2
Replies
25
Views
3K
Green7
G
B
  • Question
minimum-parts decade counter circuit ideas ?
Replies
10
Views
3K
danadak
danadak
C
  • Question
Query Regarding Thermal Printheads
Replies
2
Views
487
ZipZapOuch
ZipZapOuch
P
  • Question
test query on 16mm B&H projector
Replies
0
Views
606
paddy ryan
P
F
  • Question
Noob to electronics. Quick question
Replies
6
Views
562
BR-549
BR-549

Latest threads

New Articles From Microcontroller Tips

Back
Top