S Speakerguy Active Member May 23, 2009 #1 Just double-checking, but tying the RESET pin low will result in normal device operation, right? Just making sure it's not like an active-low reset or something. I normally don't use stuff this old Thanks!
Just double-checking, but tying the RESET pin low will result in normal device operation, right? Just making sure it's not like an active-low reset or something. I normally don't use stuff this old Thanks!
audioguru Well-Known Member Most Helpful Member May 23, 2009 #2 Yes, the datasheet from Texas Instruments says that a high on the Reset pin causes the stages to be reset.
Yes, the datasheet from Texas Instruments says that a high on the Reset pin causes the stages to be reset.