Try two 9V batteries for a +-9V supply. The output is inverting for the configuration shown, but you can flip the polarity of the input.
Vos, Ib and unity gain stable are the three most important parameters. Being able to zero the OP-amp helps a little too.
Don't forget 0.1 uf ceramic bypass capacitors.
A metal film or polyester cap in parallel with the feedback resistor helps. fc=1/(2*PI*R*C); fc is corner frequncy, R is the FB resistor and C is capacitance in Farads.
You may need to put a high value resistor in series with the + and - input. >10K-100K.
I built plenty of these things including one for measuring quantum efficiency of a solar cell.