Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
One's a timer, and the other is a Hex inverting Schmitt trigger - which you use depends what you're trying to do, there are a great many different ways to make a simple alarm circuit.
If you want a very simple alarm sound that is a continuous steady tone then use a 555.
But the 6 Schmitt Trigger inverters in a 74C14 or 74HC14 can make 6 different frequencies. One frequency can be changed slowly by one of the other slower frequencies with a diode or resistor, or the tone can be turned on and off and beeping with a diode gate.
You can do a *lot* more with a 7414 (or a CD40106) than you can with a 555, especialy if you have one handy, and you can drive a piezo sounder with it as well. Swings and roundabouts really.
I have never seen a CD40106 but I have used a CD74C14 and an MC14584 which are also ordinary Cmos hex Schmitt-trigger inverters. Their supply is from 3V to 18V. Each part has its own threshold voltages.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.