ghostman11
Well-Known Member
i have been trying for the last couple of days to get a circuit to work and i am having no luck, what i want to do is the following.
i have 4 pc's that control k190 tempretue units thru the serial ports on the pc's (theese units will be replaced eventualy), they work great except we get alot of power outs around here that normally only last 3-5 mins. The problem i have is i then have to go turn the pc's back on so the units function, if it happens dureing the night then i loes incubators full of eggs . my idea is simple.....if i have a 555 monostable circuit that is connected to a 12v psu then when the power cuts out and comes back on i want it to send a pulse to eigther transistors (prefered) or relays that are connected to the on switches on the pc's in effect shorted them every time the power comes back on thereby turning the pc's back on automactically .
i managed to figure i would need the 55 in monostable mode and i only need a single pulse each time of a second any more than 4 seconds and the pc will shut off (bios setting). i have attached my attempt of the circuite can any one point out where i am messing up please.
i have 4 pc's that control k190 tempretue units thru the serial ports on the pc's (theese units will be replaced eventualy), they work great except we get alot of power outs around here that normally only last 3-5 mins. The problem i have is i then have to go turn the pc's back on so the units function, if it happens dureing the night then i loes incubators full of eggs . my idea is simple.....if i have a 555 monostable circuit that is connected to a 12v psu then when the power cuts out and comes back on i want it to send a pulse to eigther transistors (prefered) or relays that are connected to the on switches on the pc's in effect shorted them every time the power comes back on thereby turning the pc's back on automactically .
i managed to figure i would need the 55 in monostable mode and i only need a single pulse each time of a second any more than 4 seconds and the pc will shut off (bios setting). i have attached my attempt of the circuite can any one point out where i am messing up please.