4 Way Momentery Latch

Hi,

I'm looking for a device that will allow 4 momentry active low or high, don't mind, inputs to toggle a set of outputs.
When any of the buttons is pressed, it will set the other 3 outputs low, and set its output high.
Even better if it has an inbuilt binary encoder so that there are two outputs giving either 00, 01, 10, or 11.

Anyone know of a chip to do this?
Thanks

bh00 said:

Anyone know of a chip to do this?

Click to expand...

Like most things, use a PIC - you can program it to do what you want!.

True, but it would have to be a 16 pin chip I'm guessing and I'd like to avoid having to have any with the external oscillators, etc just for size reasons. Having said that, any discrete logic chips would probably be just as large!
I'll investigate!

I would use one of many 8 pin microcomputers. Four inputs 2 outputs gnd and supply. I have used the PIC12F508. At 100 pieces it is $0.60. If you need help with programming it, write me.

bh00 said:

True, but it would have to be a 16 pin chip I'm guessing and I'd like to avoid having to have any with the external oscillators, etc just for size reasons. Having said that, any discrete logic chips would probably be just as large!
I'll investigate!

Click to expand...

hi,
Look at the HEF4514 or HEF4515 1 of 16 decoders, with input latches.

Get the datasheet from www.datasheetarchive.com

If you need some help on how to use the device, post.

Eric