Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Did rebooting the computer cause the USB port to start working ?
No...and i dont think that my computer goes in the modern section, its 10 years old.
Anyway,i use a 9 volt battery/regulator to avoid to reboot the computer now.
My father has no more reason of being angry now(he was furious lol).
You have never said exactly what you did. I don't see how you could short anything using the starter kit as it comes straight from the factory
Is 56.3 khz near enough for a 56 khz tsop irsensor?
I have never used a decoupling resistor the modules I use never would work wired like that I found this a long time ago **broken link removed** And it works for me. But maybe I should of said not wired the same tobe80be's diagram misses out the supply decoupling resistor, this is pretty crucial
Only thing is I use a 10k and 4.7uf I think in my drawling I marked the cap a 47uf it should be 4.7ufAll ir module don't work the same.
What electronics store do you go to for parts? There are many in MTL
The best thing to do is get the module working first then hook it to your pic you can hook a led from the output with a resistor 1k to - volts and see if it's working Some modules you have to hook up like this.
Why 330 ohm?, that's exceptionally low, and not required to be.