Ok, so heres what mine looks like on the inside:
**broken link removed**
Im assuming that it has all the extra circuitry due to the digital voltmeter on it. I ran it for about 3 hours the other day and the only real problem I had was that I could hear the hum of the current through the box. Im assuming that its probably a shielding issue and the fact that the components are so cheap. But surprisingly it didnt over heat.
The other circuit I found that in my mind resembles the schematics posted on here is:
**broken link removed**
The only difference I see is a lack of resistors and the addition of the analog voltmeter.
I tend to be more of a visual learner, thats why I figure if I put these pictures up on here and yall can look between the schematic and the picture and tell me if its close, I'll be able to have a better grasp of what needs to be done.
**broken link removed**
Im assuming that it has all the extra circuitry due to the digital voltmeter on it. I ran it for about 3 hours the other day and the only real problem I had was that I could hear the hum of the current through the box. Im assuming that its probably a shielding issue and the fact that the components are so cheap. But surprisingly it didnt over heat.
The other circuit I found that in my mind resembles the schematics posted on here is:
**broken link removed**
The only difference I see is a lack of resistors and the addition of the analog voltmeter.
I tend to be more of a visual learner, thats why I figure if I put these pictures up on here and yall can look between the schematic and the picture and tell me if its close, I'll be able to have a better grasp of what needs to be done.