chemelec
Well-Known Member
Brimby
If you want to use a 555, it is not a problem, just replace the transistors with a 555 driving the transformer.
BUT if you want a Reasonablypowerful Stun Gun you will still need a transistor to increase the output of the 555.
Gary
The "X" is just a Test Point for the Increased Voltage.hi, i did access your site gary and it was nice but un helpful to me. i notice that stun gun designs come in two forms: transistors or the 555 timer. i am trying to build one using the 555 timer design. so aside from direct advice i cannot benefit from you site. sorry!
there is an x on the transformer for this stun gun design, does it mean that it must be tied down? and what does x100 mean?
luke
If you want to use a 555, it is not a problem, just replace the transistors with a 555 driving the transformer.
BUT if you want a Reasonablypowerful Stun Gun you will still need a transistor to increase the output of the 555.
Gary