Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

what are data (n+1)-- Data (n+x) in datasheet

Status
Not open for further replies.
Set link to open to page 12: https://datasheets.maximintegrated.com/en/ds/DS1307.pdf#page=12

I think what it means is:

if you set 00h in the address the data can be sequentially set, so you don't need to define the offset every time.

So, 00h is the initial offset, then data1 is the value to write to 00h. data2 is the value to write to 001h etc.
You don;t have to specify the address of data2, it's the second piece of data.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top