Weird annoying errors MPLAB

Status
Not open for further replies.

AtomSoft

Well-Known Member
I get so many errors and have no clue why... can someone please tell me what is going on here:
Code:
----------------------------------------------------------------------
Debug build of project C:\Users\Jason\Desktop\DS500\JaKo 16F84A\jako.mcp' started.
Language tool versions: MPASMWIN.exe v5.37, mplink.exe v4.37, mplib.exe v4.37
Preprocessor symbol __DEBUG' is defined.
Mon Jan 03 15:32:57 2011
----------------------------------------------------------------------
Clean: Deleting intermediary and output files.
Clean: Done.
Executing: "C:\Program Files\Microchip\MPASM Suite\MPASMWIN.exe" /q /p16F84A "main.asm" /l"main.lst" /e"main.err" /o"main.o" /d__DEBUG=1
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 31 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 32 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 35 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 36 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 37 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 38 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 39 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 40 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 42 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 43 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 45 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 46 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 47 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 48 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 49 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 50 : Executable code and data must be defined in an appropriate section
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 51 : Executable code and data must be defined in an appropriate section
.............[b] MORE BUT TOO LONG[/b].....
Error[152]   C:\USERS\JASON\DESKTOP\DS500\JAKO 16F84A\MAIN.ASM 358 : Executable code and data must be defined in an appropriate section
Halting build on first failure as requested.
----------------------------------------------------------------------
Debug build of project C:\Users\Jason\Desktop\DS500\JaKo 16F84A\jako.mcp' failed.
Language tool versions: MPASMWIN.exe v5.37, mplink.exe v4.37, mplib.exe v4.37
Preprocessor symbol __DEBUG' is defined.
Mon Jan 03 15:32:59 2011
----------------------------------------------------------------------
BUILD FAILED

Last edited:

AtomSoft

Well-Known Member
i just noticed a newer version of MPLAB is available maybe theres a fix in it.. brb going to download and try it out

AtomSoft

Well-Known Member
Ok the update did NOT fix anything. I still get those errors and am so confused why.

Wp100

Well-Known Member
Hi Jason,

That code does build ok, think you have got your Project parameters set for Relocatable code instead of Absolute.

BTW have you updated to Mplab 8.63 - seems their are issue with it and Pickit2/3 etc, ref Microchip forums, so you might be better with your earlier version.

AtomSoft

Well-Known Member
yep! omg stupid error... Thanks a ton dude! wow that was crazy!

Last edited:

be80be

Well-Known Member
yep! omg stupid error That's always the one you posted and wish your in a hole

We didn't have that to worry about a with MpLab 8.10 I have may MPLAB ask me so I'll stay on track LOL

AtomSoft

Well-Known Member
heh yeah it asked me but i guess i was in a rush and poof clicked the wrong button.. they should ask ... "Are you sure?" lol

Status
Not open for further replies.