Hi Mr. Russel.
Happy new year to you. Sorry for the delay in my answer. I was in vacation outside my
city. thank you for your reply.
yes. The vehicles travel in a straight track like, for example, a interstate highway.
the weight scale is since little trucks (2 axis) to big trucks (3,6 or more axis)
like , for example, cane trucks, trailer of 30 ton,.....
the weight scale contains weights since 2 ton to 40 ton because I live in a sugar producer region.
In addition, my region is near of a seaport.
In Colombia, there is not this weighing system. there are a weighing stations but
the vehicle must stop at station.
the other problem is the university has not a truck for the project because keep
the truck without working is very costly.
for this reason my project´s director thinks that the project can be modeling doing
a prototype. the prototype must contain a proportion of concrete mixing that let
doing a simulation of the highway´s pavement. We want obtain a small research prototype
using less weight and other concrete mixing. but we don´t know if it is possible but
it can be tried through the investigation. We wait to obtain the same characteristic
curves (voltage vs speed , voltage vs weight, .....) as the real system.
meanhile I am searching through the Internet the real system curves, the weighing sensors used for
this system, etc, all the information possible about the in-motion weighing.
see you later. sorry for my english but if there is anything that you don´t understand me then ask me again.
bye.