Hi ttbuddy,
Could you check LM2936-3.3 output is 3.3V, I thought the Ic connect wrong way,also seem RB4 not connect to E LCD pin
Well I use a battery source of 9V (measured to be 8.6V)
and the output from the LM2936-3.3 strangely is 8.0V !!
EDIT:
I just found out that I got lm2936z-5 .....
but the output still over 5V ...
I think not much different between 3.3V and 5V as both LCD and PIC may consume ~5V.
Last edited: