voice activated FM transmitter which transmits at 160.7 MHz

Status
Not open for further replies.

chikedef

New Member
help: voice activated FM transmitter which transmits at 160.7 MHz

l wish to design a voice activated FM transmitter design which transmits at 160.7 MHz. l intend to implement my design using two or three transistors that is oneor two for amplifying and the other as part of the colpitt's oscillator. the transmitter has a range of 100m hence transmitts less power.

the transmitter must transmit only when someone speaks, the microphone, in this case an electrect is to be used as the transducer otherwise it must be in an idle state
 
Last edited:
frequency

my partner is designing the receiver. thats the frequency l was allocated by the regulatory authority. if you can help how do l go about it?
 
my partner is designing the receiver. thats the frequency l was allocated by the regulatory authority. if you can help how do l go about it?

Check out radio amateur 145MHz designs (and go from there) - a crude 'bug' type circuit will NOT be suitable, and would not comply with the licence requirements of the allocation.
 
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…