Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

variable speed switch question

Status
Not open for further replies.

Secret Agent

New Member
I have a Delta 37-190 (6 inch jointer). It is pretty much the same as a Delta JT-160. **broken link removed**

The variable speed switch went out. A replacement switch is $129. A new jointer is $239.

Harbor Freight has a variable speed controller for a router that will operate up to 15 amps. - Harbor Freight Tools - Quality Tools at the Lowest Prices

Can I disconnect the variable speed controller on the Delta Jointer and wire it direct to bipass the variable speed controller and then plug the jointer into the variable speed controller from Harbor Freight. I do not care if the RPM is the same as the original factory settings, I just want to control down the speed of the jointer so that it isn't going full speed.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top