Urgent~~FAN8200

Does anyone know any Motor Driver which is similiar to FAN8200 ? DIP pin type is required (Cos i cant get it in the market as many places are out of stock)
Urgent Urget

You can get that part from Jameco.
https://www.jameco.com/webapp/wcs/s...uctId=241867&searchValue=fan8200&searchType=m

Thanks a lot Mikebits~
Just for curiousity, is there any part which is similiar to it?

Which one of your 3 identical post should I respond too?

You might have a look at these parts.

L293D
https://www.electro-tech-online.com/custompdfs/2008/08/l293d.pdf

SN754410
https://www.electro-tech-online.com/custompdfs/2008/08/sn754410.pdf

I did not bother to compare specs as you can do that. Your original chip does not seem special so I would think you could use the other parts, but you will have to check.

In the future try not muti-posting the same question.

Sorry about the multi posting due to i was too urgent to get the answer of the replacement chip set for the FAN8200.
Thanks again btw for the great information.