Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thanks for posting that!
Thanks a lot for everyones input too
Ok, my expertise is quite limited. Really limited. I got the workings of a relay down, and that is about it.
The data sheet from mouser says the LM339 is a 16pin?
the IRF530 looks like this?
**broken link removed**
Surface mount hmmm? I guess I should tackle how I'm going to get that all squared away.
How does one connect that middle pin?
R1 - 4.7megohms
(Metal Film Resistors - Through Hole 1/4 WATT 4.7M OHM 1%)
RK1/4DC4704F
R2 - 2.2mohms resistor
(Carbon Film Resistors - Through Hole 2.2M OHM 5% 1/4W)
CFS1/4CT52R225J
R3 - 2.2mohms resistor
(Carbon Film Resistors - Through Hole 2.2M OHM 5% 1/4W)
CFS1/4CT52R225J
R4 - 10k resistor
(Metal Film Resistors - Through Hole 10Kohms 1% 50PPM)
270-10K-RC
R5 47k resistor
(Metal Film Resistors - Through Hole 1/4 WATT 47K OHM 5%)
MF1/4LCT52R473J
R6 - 2k resistor
(Metal Film Resistors - Through Hole 2K 1% 50PPM)
MF1/2CC2001F
C1 - 2u (n/a 2.2uF)
(Multilayer Ceramic Capacitors (MLCC) - Leaded 2.2uF 10V X5R 10%)
FK14X5R1A225K
C2 - .2uF
(Aluminum Electrolytic Capacitors - Leaded 50volts 0.22uF 5x11 20% 2LS)
UVZ1HR22MDD
C3 - .1u
(Polyester Film Capacitors 400volts 0.1uF
QXK2G104KTPTZH
C4 - 100uF
(Aluminum Electrolytic Capacitors - Leaded 25volts 100uF)
UVR1E101MED1TD
D1&2 - 1N4148
(Diodes- General Purpose, Power, Switching. HI SPEED DO-35)
1N4148,113
L1 - relay
(Low Signal Relays - PCB COIL 12VDC NON-LATCH)
EA2-12NJ
It is connected to the tab on the other end.How does one connect that middle pin?
Simply put diodes make AC into DC. thay are one way valves for DC not so much for AC, audio is AC and batterys are DC. Other than to say it will not work you need to study rectifiers.if diodes allow electricity to only flow in one direction, wouldn't this be exactly what I need.
I just don't understand how the Diode values work.