Mosaic
Well-Known Member
Hi folks:
I have 4 Nfets switching to ground driving 4 relays.
I am using 4, 36V Transorbs to clamp transients, the NFET Vds is 60V.
Can i place a 1n4001 diode (reversed biased) between each NFET drain and the cathode of a single TVS to do the same job (+.6V on the transient clamp)?The diodes are facing cathode to cathode with the TVS.
I have 4 Nfets switching to ground driving 4 relays.
I am using 4, 36V Transorbs to clamp transients, the NFET Vds is 60V.
Can i place a 1n4001 diode (reversed biased) between each NFET drain and the cathode of a single TVS to do the same job (+.6V on the transient clamp)?The diodes are facing cathode to cathode with the TVS.