Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Feedback opto with high Common mode transient immunity (CMTI)

Status
Not open for further replies.
F

Flyback

Well-Known Member
Hi,
We are doing 100W buck. Vin = 200V, Vout = 36V, Fsw = 150kHz.
The FET is low side, (easy to drive) and the controller is grounded at the input connector ground.
As such, we need opto feedback.
But AYK, the opto, from diode side to transistor side, will see rapid dv/dt.
So we need a feedback opto with high CMTI, but no feedback opto's list this parameter.

eg CNY17-2
FOD817

FAIRS24026-1.pdf

rocelec.widen.net rocelec.widen.net

FODM121

FAIRS27631-1.pdf

rocelec.widen.net rocelec.widen.net

Do you know of feedback opto's which do list this parameter?
 
Status
Not open for further replies.

Similar threads

F
  • Question
Y capacitor location for Conducted immunity?...for conducted EMC?
Replies
0
Views
854
Flyback
F
F
  • Question
Common Mode Input Range of Opamp ignored?
Replies
10
Views
3K
schmitt trigger
S
G
  • Question
Voltage follower with feedback resistor?
2
Replies
32
Views
6K
Diver300
D
I
  • Question
Landscape Light controller design feedback
Replies
8
Views
3K
iggyspark
I
electronium
  • Question
High frequency voltage measurement with digital multimeter
Replies
15
Views
5K
electronium
electronium

Latest threads

New Articles From Microcontroller Tips

Back
Top