Tilting my camere using DC motors, Torque 5kg-cm

[buddyme]

Hi Guys,

I need your help.
I have a 1.2lbs camera and I want to tilt x by 45deg.

Can the motor hold it there in place while the power is turn off?
e.g I turn on the power then when it gets to about 45 deg then turn it off
to stay there. If it can't be done then what is the motor I need to get the job done.

I am thinking with the bi-directional controller I can do smooth up and down tilt
and pause the camera at a 45% angle.

[m]==|__x__| to [m]==/__x__/


Basically, I want to do smooth Up and down tilting like this.
**broken link removed**
http://www.valentinsteiner.de/jib/ehead/ehead_001_big.jpg

Bi-directional DC Motor Speed Controller
**broken link removed**

High Torque DC Motor
**broken link removed**

 

[shortbus=]

Try these; **broken link removed**

 

[buddyme]

Try these; **broken link removed**

Thanks shortbus.
I guess that's the best approach instead of creating one from scratch.

You know if those servos are noisy? I looked into some video in youtube
and I find them to be so noisy. Maybe depends on the servo specs.