Okay let me try to explain my setup. I have a 8 channel DVR that I currently have 2 cameras hooked up to. The DVR has a video out that displays whatever cameras you have selected. This works great for running the video out to a aux input on a TV ect... Hoever what I would like to do is this :
Convert the video signal to coaxial and run it in with the cable lines in my house. So when you turn the tv to say channel 3 it displays the cameras.
I have it already setup like this using a RF modulator, when it is connected the cameras show on all tvs that are set to channel 3. However my problem is that when the rf modulator detects a signal it intefers with all other channels.
So Cable works, then plug in the video inout from the DVR and everything goes static but channel 3 with displays the cameras.
Is there a way to keep the cable working and still display the cameras on channel 24/7????
I hope this was clear enough, if not let me know what needs explained.
Thanks!!!!!!
Convert the video signal to coaxial and run it in with the cable lines in my house. So when you turn the tv to say channel 3 it displays the cameras.
I have it already setup like this using a RF modulator, when it is connected the cameras show on all tvs that are set to channel 3. However my problem is that when the rf modulator detects a signal it intefers with all other channels.
So Cable works, then plug in the video inout from the DVR and everything goes static but channel 3 with displays the cameras.
Is there a way to keep the cable working and still display the cameras on channel 24/7????
I hope this was clear enough, if not let me know what needs explained.
Thanks!!!!!!