Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

STM32F4 Discovery and Pl2303 combination for UART

Status
Not open for further replies.

Wond3rboy

Member
Hello

I was wanted to perform UART communication using the STM32F4 discovery and the PL2303 USB to TTL converter. However, since the PL2303 works with 5V logic (and I don't have the soldering skills to change pin 4s voltage by the way). Given that the STM32F4s pins are 5V tolerant, should I try to use it or is it going to damage the board?

Thanks.
 
Hi Nigel

Thanks for the reply.

I thought all pins were 5V tolerant. I will go and read up on this further before I attempt to perform UART communication.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top