Renick Marsh
New Member
I would really appreciate some help with the following...I'm trying to wire a counter on a breadboard that counts in a specific sequence ( 2,6,7,5,1,8,0 ). I figured out the Logic Form and the JK Logic Programming part, but still fuzzy on K-Maps and how to wire the logic gates. If someone could help me with the wiring schematic, I would be very grateful. Thank You.
I'm working with the following...
555 Timer ( Working )
Man72 Seven Segment Display wired to a 7447 ( Counts 0,1 )
2 JK Flip Flop Chips ( 4 JK Flip Flops Total )
1 Quad AND Gate Chip ( Can use others if need be )
1 Quad OR Gate Chip ( Can use others if need be )
Multisim v. 13
Thanks again,
Renick Marsh
I'm working with the following...
555 Timer ( Working )
Man72 Seven Segment Display wired to a 7447 ( Counts 0,1 )
2 JK Flip Flop Chips ( 4 JK Flip Flops Total )
1 Quad AND Gate Chip ( Can use others if need be )
1 Quad OR Gate Chip ( Can use others if need be )
Multisim v. 13
Thanks again,
Renick Marsh