popatop7308
New Member
I put in a new start cap 1.5uf 250 v. with 2 terminals. The original cap had 3 terminals a 1.5uf a 0.5uf and a "C" connection it is a 50~ 60~ switchable machine. 2 black wires 1 green wire and 2 brown. I hooked up the 2 black and green up to the new cap. I terminated the 2 brown wires. The machine runs at the correct speed now but my left VU meter then my right VU quit working shortly afterward. I don't know if the brown wires I disconnected had anything to do with it or not. My schematic only shows 2 black to common green and brown wire to 1.5uf and a single brown to 0.5uf. obviously, I have done something wrong. Any advice or help would be appreciated thank you Dan in indianapolis
