Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Soldering help needed., It don't flow right

Status
Not open for further replies.
I was one of the subjects in a government study about soldering, apparently the only concerns of the study were with regard to the possible triggering of asthma attacks in a very tiny percentage of known asthma suffers - caused by the flux vapour.

They were unable to find a single case in the service industries, but there were odd ones in manufacturing, where you soldered 8 hours a day! - their conclusion was that no extraction was required for the small amount of soldering done in a serice environment.

Presumably the same would apply to the amount of soldering done in a home environment?.

So basically, if you want to extract?, fair enough - it won't do any harm, but it won't do any good either! :D
 
Status
Not open for further replies.

New Articles From Microcontroller Tips

Back
Top