thanks thanks thanks , but guys will u help me out again , i really going mad about this project . too dumb
ok here my circuit diagram
PC1 3 volt solar cell from a sidewalk solar light
C1 22 uF, 10 volt (values not critical)
C2 100 pF, any voltage or type, typically ceramic
C3 10 uF, 16 volt or more for higher voltage battery
R1 1.5 k, any type
R2 3.9k, any type
R3 10k, any type
R4 180 ohm, any type
R5 4.7k, any type
R6 10 ohm PTC (see text).------------------------------ i don know what this , n where to get
L1 50 to 300 uH (see text).------------------------------ i don know what this , n where to get
D1 1N5818 schottky rectifier, just about any will do.
Q1 2N4403, or similar
Q2 2N4401, or similar
J1 output jack
B1 6 volt NiCad battery w/fuse-------------------------- for this can i replace 4 AA battery voltage around 4.5
**broken link removed**