shorted all the outputs of a 74LS32

[aromph]

Here we go again.

Will it be alright if I shorted all the outputs of a 74LS32 ? ( only one output is necessary ). My existing circuit places the ouputs of the two OR gates next to the inputs of the other one, leaving another OR gate floating. I wanted to use all 4 OR gates, so I can use less ICs. I don't want to destroy any components by experimentation.

Thanks!

 

[Sebi]

Don't connect the outputs directly paralel, the inputs of free gates don't leave floating. Connect it to positive supply with 10k resistor or direct to GND to avoid the self-oscillation and more power consumption.

 

[aromph]

Thanks Sebi!