Hello Everyone,
I am working on a project for my car. I would like to make some sequential (also known as chase) turn signals. I have looked around on the internet and saw some people that already sell "Kits", but the catch here is that their kits control all three tail lights as brake lights and turn signals. I am only only trying to control two of the three lights as brake lights and then all three as a turn signal.
I have contacted these guys as well as some other companies and they do not want to modify what their current desing to make a new one. So I am stuck trying to figure out how/who can do this.
I have custom circuit boards that I made for LEDs to replace the Halogen bulbs so I can do some modifications to those boards if need be.
The running lights, the brake lights and the turn signals all have their own wire.
Here is the basics of what I am looking to accomplish.
Turning:
I would need the running lights to be on (under normal use) and as soon as the turn signals are applied, the module would shut down power to the running lights AND brake lights to allow for the sequential or chase turn signals that would now power the two brake lights as well as the turn signal.
Braking:
Would it be possible to have a setting for:
1. If the running lights are on and the brakes are then applied, it does not do the chase pattern. The brakes act normal.
2. And if the running lights are on and the brakes are applied than it does a single chase pattern and then return to being bright on just the two inside brake lights?
If having #2. is entirely too complicated than I wouldn't mind just having the brakes do their normal routine which is to just make the running lights brighter.
Here is a picture/illustration of what I would like the tail lights to do.
**broken link removed**
Thank you guys for even looking. I hope someone can help. I would love to see these on my car.
I am working on a project for my car. I would like to make some sequential (also known as chase) turn signals. I have looked around on the internet and saw some people that already sell "Kits", but the catch here is that their kits control all three tail lights as brake lights and turn signals. I am only only trying to control two of the three lights as brake lights and then all three as a turn signal.
I have contacted these guys as well as some other companies and they do not want to modify what their current desing to make a new one. So I am stuck trying to figure out how/who can do this.
I have custom circuit boards that I made for LEDs to replace the Halogen bulbs so I can do some modifications to those boards if need be.
The running lights, the brake lights and the turn signals all have their own wire.
Here is the basics of what I am looking to accomplish.
Turning:
I would need the running lights to be on (under normal use) and as soon as the turn signals are applied, the module would shut down power to the running lights AND brake lights to allow for the sequential or chase turn signals that would now power the two brake lights as well as the turn signal.
Braking:
Would it be possible to have a setting for:
1. If the running lights are on and the brakes are then applied, it does not do the chase pattern. The brakes act normal.
2. And if the running lights are on and the brakes are applied than it does a single chase pattern and then return to being bright on just the two inside brake lights?
If having #2. is entirely too complicated than I wouldn't mind just having the brakes do their normal routine which is to just make the running lights brighter.
Here is a picture/illustration of what I would like the tail lights to do.
**broken link removed**
Thank you guys for even looking. I hope someone can help. I would love to see these on my car.