Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

problem with ntc thermistor and Aref

M

mah

Member
I have problem when i read from ntc thermistor, lcd display -273 C on lcd (proteus) and it doesn't change. that happened when i connect Aref to ground and program ADC REF to internal cap. but if i connect it to 5v and program its refernce to vcc it works fine. what is the problem?​

**broken link removed**
 
You must log in or register to reply here.

Similar threads

H
Compiling and Building Problem .Hex And .rom error Please Help me
Replies
8
Views
8K
Haydar5988
H
A
Bought cheap chinese usbasp but it can't communicate with chip
Replies
4
Views
7K
tepalia02
T
H
Trouble with getting data from MQ135
Replies
1
Views
8K
Reloadron
Reloadron
M
Interfacing ZMOD4410 with Arduino UNO
2
Replies
22
Views
22K
pis7
P
riccardo
Using PA0 (AREF) on an ATTiny1634 as a normal I/O pin while using internal 1.1 Reference
Replies
0
Views
4K
riccardo
riccardo

Latest threads

New Articles From Microcontroller Tips

Back
Top