baconbutty
New Member
I am living in a fairly remote place and need to get 2CR5 batteries for a flash slave on a regular basis. These things are $20 a pop when they become available... so, thinking it may be possible to utilise a PP3 with it's output divided down from 9V to 6V, but was wondering if anything like this has been tried?
I would use back a 2CR5 casing with original batts removed.
I'm also considering that a potential divider cct would draw current even if the device using power is not switched on. Would a simple toggle switch suffice in such circumstances or is there something better?
Feasible? Any/all comments welcomed.
I would use back a 2CR5 casing with original batts removed.
I'm also considering that a potential divider cct would draw current even if the device using power is not switched on. Would a simple toggle switch suffice in such circumstances or is there something better?
Feasible? Any/all comments welcomed.