PM3200 sematic request.

[Sebi]

I search a sematic of PM3200 (Philips) oscilloscope.
I hope somebody can help me...

 

[Geoffrey Angus]

PM3200 schematic

Try this site address :- **broken link removed**

 

[andrew_in_the_search]

pm 3200 request

hi geoff,

I`ve been searching long time this schem too, but the link doesn`t work for me.
can you help me with that?
thanks in advance/Andrew.

 

[Geoffrey Angus]

Pm3200

The thread no longer works for me either. The schematic was downloaded around 2 weeks ago, will try to attach for you at a later date! The PM3200 I have is a series 4 and has a twin triode valve (tube) on the PCB. The schematic I have is a later version without the valve (tube).

Geoff

 

[Geoffrey Angus]

PM3200 schematic

 

[andrew_in_the_search]

thanks geoff...

You really saved me with this, geoff; very thank you, really.
my scope uses 12ax7 too, but it´s good (some kind of burnproof input)
I needed this to try to adjust those many trimpots inside.
If you (or anyone) needs some of:
-hf tranceivers
-switching power electronics,
here I am.
tks again/andrew

 

[Geoffrey Angus]

Pm3200

I have the rest of the manual available if you want it!

Geoff

 

[andrew_in_the_search]

great! I want it, but only if it takes little time of you.
tell me if the file is too big for this way.

Andrew.

 

[Geoffrey Angus]

PM3200 manual

Dear Andrew
Please find the balance of the PM3200 manual

Geoff

 

[Geoffrey Angus]

PM3200 schematic & manual

I search a sematic of PM3200 (Philips) oscilloscope.
I hope somebody can help me...

Sebi,
Have just posted a set of schematics and manual to Andrew.
Hope they are useful

Geoff

 

[andrew_in_the_search]

I think because of you I`ve founded "my balance" with that oscilloscope.
There`s a lot of work to do and translate, so: THANK YOU.
by this time I have no camera, so i'll send you a picture of this model later.
this comes with the battery unit, but only have pieces of it.
have you ever runned a calibration in your scope?
I think Sebi is working too!..
greetings/Andrew

 

[camiel]

Thanks for the schematics, I hope they are alspo usefull for me
greetings
Camiel

 

[strophlex]

Thanks for those schematics. Really nice.

 

[Vic le Roux Consult]

Thank You very very much
Vic le Roux South Africa

PM3200 schematic

 

[Vic le Roux Consult]

Thank you very very much

Vic le Roux

South Africa

 

[siloe]

thank you very much for schematics and manual

 

[Filippo_M]

Hi,
thanks for all the pictures posted... is it possible to have the entire manual?
I'm an italian boy and also I have an oscilloscope Philips PM3200: I found the service manual with schematics and calibration instructions, but it's in german language...
I can give you this manual if you want.
Bye

-Filippo-

 

[hotwaterwizard]

I found the whole manual in Dutch

 

[Filippo_M]

Thank you hotwaterwizard,
I found this manual too, but (language apart) it has the schematics for an other model of oscilloscope, the Philips PM 3200 X (10 MHz bandwidth)... My model is PM 3200, 15 MHz...

-Filippo-

 

[hotwaterwizard]

That is it but, Here is another