Beau Schwabe
Active Member
I am using a PIC10F202 in a project and all is ok, except my programmer won't program it as a PIC10F202 .... but if I tell the programmer it is a PIC16F54 instead, it will program just fine.
All seems to be working ok so far with the PIC10F202, I was just curious if there were any issues or gotchas that I might need to watch out for or be aware of.
BTW)
The Programmer I am using is a DIY K150 Clone I picked up on eBay for about $10, and the Assembly code is written using MPLAB IDE v8.92
Thanks
All seems to be working ok so far with the PIC10F202, I was just curious if there were any issues or gotchas that I might need to watch out for or be aware of.
BTW)
The Programmer I am using is a DIY K150 Clone I picked up on eBay for about $10, and the Assembly code is written using MPLAB IDE v8.92
Thanks