Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Both signals 60 Hz? Logic voltage? (0 to 5 or 10V?) If so, I would consider a 4066 of one type or another.
Both signalsare 60 Hz but one is 5 V square the other is an ramp voltage about 2 Vpp
I did not understand well that you said but i have two signals with 60 Hz...they are fixed in frequency. I want to start my ramp signal when when the square wave is positive edge triggered.I think phase locking can work for this..Any idea
If you can provide a drawing of your input waveform, and the proposed output waveform, then we might be able to help.I did not understand well that you said but i have two signals with 60 Hz...they are fixed in frequency. I want to start my ramp signal when when the square wave is positive edge triggered.I think phase locking can work for this..Any idea
Do both of those signals already exist, or do you have one and want to generate the other?Here it is ..first one is my reference signal.. second (ramp) one is my input signal...I want it to start at the positive going edge of reference signal..
thank you
On your other thread, you indicated that the ramp comes from a CRT monitor. Is this the same ramp?coming from a graphics card..it is the vertical sync signal of the card..and i produce my input signal ..