New Forum Struction: have your say!

Status
Not open for further replies.
I beleive it would be great if we separate between the
Atmel micro controllers and
Microchip microcontrollers

also if it is possible in the same category, to separate between the Assymply languge users and the Higher language users such as BASIC, Pascal, C .... etc
 
Ditto on the digital and analog for sure.

And maybe programming, ASM, C, BASIC (but microcontrollers cover that) and you will get others that will want a group. Like microcontrollers PIC, ATMEL. Same problem

I think this forum is great (best I have found), I know there are times, I wish I could have left an analog question, but left it in microcontrollers, since I was reading it with a microcontoller, and a lot of the analog guys do not use microcontrollers and to not read that section.
 
I am a newbie to electronics and forums. When I first found this forum, it was a confusing place, so I think your rearranging is a very good idea. I was posting a question and wasn't sure where it should go, but having a newbie place that would be ecliptic in nature would be good
 
nice1

i dont have any problem with it, infact its a good idea, and it will be easy to use the site. well i think you should do it...
best of luck!
regards,
ajay bhargav
 
people are going overboard now with all these categoties, perhaps some sub categories but as pointed out too many are not a good idea, a good balance between diversity of topics must be found. a good example is that now the first two forums are more or less the same thing the difference is so subtle that they are not used properly and used eratically. they should merge into one but other categories could be made. for example be it main or subcategories analogic stuff can be divided into two main brances: control and amplifiers, perhaps a section for power supplies as well so perhaps general analogic-amplifiers-PSU a digital forum can be made but we still need one dedicated to microcontrollers that could perhaps be split by makes ie: pics-motorola etc
 
hi..its a great idea ...it would be better if u also add tutorials abt MATLAB,ORCAD,VLSI etc...
 
it is very good idea

first i would like to thank u for ur interest to notify all members of all good new forums u wish to add, i suggest to add a separate one for Laser Technology. i think it will have a great chance.
 
My thought is electro-tech-online.com is like 99.9% perfect for me. Maybe a small tweak (you guys have a great forum, look at the others).. More detail might be good in some part, but also many might skip areas they can help in if there are too many to check..

Maybe:
Code: 
NEW  new to electronics, have a question (ask anything)
KEEP electronics general 
KEEP electronic project ideas
NEW analog questions 
NEW digital questions
KEEP Robotics
KEEP microcontrollers (and microprocessors)
KEEP complete projects (same as before but code and circuit drawing)
KEEP datasheets
NEW  Alternate energy (I did like this one, something new)
KEEP the rest

The first group will get the students and the 555 questions and everyone will pop in there and help.

I think sub-categories will be a mess. Imagine just micros
Code: 
   PIC
   ATMEL
   MOTO
   ARM
   INTEL
   ZILOG
   (sure I left someone out, now you have)
   STAMP
   PICAXE
   RABBIT
   (not going to google, but many others)

Anyway, just there is a lot to think about. How long before PIC is broke up into 12F, 14F, 16F and 18F. Atmel has the S90, tiny and mega.

Just my $.02
 
Last edited:
What about a For Sale thread? You know, for members to sell their excess stock for a couple bucks (or anything else for that matter)
 
BioMedical

Categorizing n Classifying is indeed a welcome idea.. I would just like to suggest a BioMedical Engg forum.. Something that deals with EMG, ECG, EEG signal processing, sensors for BioMedical Instrumentation etc.. Do think about it..
Thanks.
Elexhobby
 
a seperate section for Owners manuals or Service manuals would be nice. A High voltage section and an Electronics chat section.
 
RF Forum

Hi great idea i work with RF in the Semiconductor industry which is quite large the RF we use is to Create a Plasma and this is a totally different area than Ham Radio so yes let's have a RF Forum other than for Ham Radio
Ian
 
Please Add

You can add computer aided controlling by programming thru C and C++ control through printer port
 
Hi Electro,
I appreciate ur work

Those are great ideas; the beginner's section is essential for basic questions. Would there be a General Electronics section; also adding a section related to electronics technical repairs would be of good idea.


good luck.
 
Status
Not open for further replies.

Similar threads

U
Forum groups suggestion
Replies
0
Views
7K
upand_at_them
U
New record for blocked popups/ads!
Replies
6
Views
10K
Pommie
P
F
When not logged in, new post titles display vertically
Replies
0
Views
40K
fourtytwo
F
D
Definition of New Members
Replies
13
Views
5K
gophert
W
Anyone have contact details for large_ghostman?
Replies
18
Views
5K
KeepItSimpleStupid
K
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…