Hi all I am looking at an electronics program to play around in.
I was looking at MultiSim and have done some searching but with no luck.
I was looking to see if MultiSim actually shows the failure of LED and other components eg displays the component actually blowing like another program I used many years ago (sorry cant remember what one it was now).
MultiSim is a genius piece of work, I have worked with it and have designed and tested circuits with it for your question about failures in the software, yes the answer is simply yes, some things in it wont show as being blown or destroyed but you will get errors when something is incorrect, fuses and light bulbs both show as blown if they do fail during testing, the software also has an error checker built into it but it isnt all that great, you can also, if you have the other part, send the circuit to another software to be setup on a circuit board.
I was looking to see if MultiSim actually shows the failure of LED and other components eg displays the component actually blowing like another program I used many years ago (sorry cant remember what one it was now).