Multiple wireless LED switches

J

JustJosh

New Member

• May 2, 2010

• #1

Hi Guys,

I've searched the forums and haven't quite found the answer I'm looking for. Im trying to make several led circuits which would be on different peoples clothing, the idea is that I'd have a switch that would turn all of these on at the same time time, I'm assuming I'd have to do this through RF and was wondering what way I would go about doing that.

 

Vizier87

Active Member

• May 2, 2010

• #2

turning them on without any blinking or some pattern? Gotta give more dude.

 

J

JustJosh

New Member

• May 2, 2010

• #3

No just plain, no blinking or patterns.

 

MikeMl

Well-Known Member

Most Helpful Member

• May 2, 2010

• #4

So each person carries a "receiver"?

All receivers respond to the same transmission (i.e. no selective decoding making each receiver respond to a different code)?

How large an area do you need to cover?

Can the "transmitter" be AC line powered (indoors)?

 

Last edited: May 2, 2010

J

JustJosh

New Member

• May 2, 2010

• #5

Same transmission, yes. The area would maybe be about 50 meters tops, it will be indoors yes, but I'm not 100% sure I'll have access to a AC line.

 

MikeMl

Well-Known Member

Most Helpful Member

• May 2, 2010

• #6

What is your budget? The reason I ask is because you can buy a single transmitter for ~$25 , and the **broken link removed**are about ~ $15

 

J

JustJosh

New Member

• May 3, 2010

• #7

Im probably looking at £10-£15 per head. Will anything from here do?

**broken link removed**

 

J

JustJosh

New Member

• May 4, 2010

• #8

No, nothing?