Multiple flipflop (piano switch)

[GrahamR]

Hi all.
I thought this would be a straightforward development from a "two-key piano switch", ie an ordinary flipflop, but it's got me baffled, which admittedly doesn't take much.
I can't find anything online. Is it so easy that nobody's bothered posting it? Or am i searching for the wrong thing?
Thanks very much,

 

[Nigel Goodwin]

I've not got a clue what you're asking, I'm not surprised google doesn't help - EXACTLY what are you trying to do?.

 

[Ian Rogers]

A piano switch is normally an on off affair. ( basically a row of switches that look like a piano)

I take it you are attaching to logic to toggle when operated. is this what you are looking for?

 

[GrahamR]

Ok, maybe I'm showing my age.

Do you know those mechanical multi-button switches you used to get on radios etc for MW, LW, VHF...? You pressed one button down and the previous one popped up, and so on? They were colloquially called "piano switches". I don't know their actual name, if they had one.

I'm thinking of an electronic version. Obviously an ordinary flipflop will do the same thing as a two-button one. You "press" one side, electrically, and that side stays high while the other side goes low, and vice versa.

I'm trying to think of a "multi-button" flipflop, where "pressing" any stage sends that output high whilst lowering all the others.

Is that clearer?

Thanks,

 

[Nigel Goodwin]

Ok, maybe I'm showing my age.

Do you know those mechanical multi-button switches you used to get on radios etc for MW, LW, VHF...? You pressed one button down and the previous one popped up, and so on? They were colloquially called "piano switches". I don't know their actual name, if they had one.

I'm thinking of an electronic version. Obviously an ordinary flipflop will do the same thing as a two-button one. You "press" one side, electrically, and that side stays high while the other side goes low, and vice versa.

I'm trying to think of a "multi-button" flipflop, where "pressing" any stage sends that output high whilst lowering all the others.

Is that clearer?

Thanks,

As far as I'm aware they have never been known as 'Piano switches', as they have no relation to how piano keys work - they are known as 'radio switches', and are even called that in Delphi and Visual Basic etc.

As soon as you use the correct name, loads of options pop up:

Electronically Interlocking Radio Buttons (*improved!*)

Electronically Interlocking Radio Buttons (*improved!*): The term "radio buttons" comes from the design of old car radios, where there would be a number of push buttons pre-tuned to different channels, and mechanically interlocked so that only one can be pushed in at a time. I wanted to find a...

www.instructables.com

It could be done with flip flops, and would have been decades ago, but in any remotely modern times a micro-controller makes far more sense.

 

[Ian Rogers]

How many buttons? it would be easier with a parralel load shift register

The old radio buttons were mechanical.. Ali express even calls them Piano switches. LOL

https://www.aliexpress.com/item/1005001667891155.html?src=google&pdp_npi=4%40dis!GBP!1.15!1.15!!!!!%40!12000017050084781!ppc!!!&src=google&albch=shopping&acnt=494-037-6276&isdl=y&slnk=&plac=&mtctp=&albbt=Google_7_shopping&aff_platform=google&aff_short_key=UneMJZVf&gclsrc=aw.ds&&albagn=888888&&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en1005001667891155&ds_e_product_merchant_id=107562253&ds_e_product_country=GB&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=17859500389&albag=&isSmbAutoCall=false&needSmbHouyi=false&gad_source=1&gad_campaignid=17190468917&gclid=CjwKCAjwz_bABhAGEiwAm-P8YRwU4MkIQoee-B--w2zfLJq_tV-SY8oJrlQuRWV0PN9zWBYsHd4L_RoCWRwQAvD_BwE

 

[GrahamR]

All right, fine.
Now that I've started thinking in flipflop terms, or at least discrete logic ICs, does anyone have a suggestion for that? And curiosity, and a knack for puzzles?

It seems it should be a small development, like 3 criss-crossed transistors instead of 2 (for a 3-way one), etc, but I'm still brain-wracking.

 

[Ian Rogers]

You want to be talking to MM (MusicManager) He makes a lot of stuff like that.

If I did it it would use a small pic or a little GAL and I can output what I want from an input. But I like programming... I'm gong to do something with relays... I'll post when I'm done.

 

[Nigel Goodwin]

All right, fine.
Now that I've started thinking in flipflop terms, or at least discrete logic ICs, does anyone have a suggestion for that? And curiosity, and a knack for puzzles?

It seems it should be a small development, like 3 criss-crossed transistors instead of 2 (for a 3-way one), etc, but I'm still brain-wracking.

You're still pretty vague about it's intended purpose, I posted a link to a radio switch in post #5, and googling gives loads of hits - but is that what you want?.

You mention a 'knack for puzzles', you're not wanting a 'quiz buzzer' set up are you?, that's something entirely different again.

If it's NOT that, then there is a circuit called a 'ring of three counter', bit like a bistable but with three stable states, and it's easily extended to be a 'ring of four' counter etc. I've no idea if that could be used to make a radio button circuit or not?, I last used one 50+ years ago (and we got it out of a book in the college library).

 

[danadak]

Here is a single chip solution, 8 keys (I think based on resources left might be
able to do 32 or more). Each key debounced. I chose ISR to handle each key.
You could use onchip reg to read the key vs the ISR approach. Or a scanned mux,
many possibilities, again all onchip. The result of the key controls the DDS in turn
feeds the Wavedac to produce sine/tri/ramp/square/arbitrary to gen sound if so
desired.

 

[GrahamR]

Sigh! "knack for puzzles" referred to the enjoyment of puzzling out the circuit!

There's no vagueness in its purpose - it's just something I've occasionally puzzled over, and finally ended up here. I don't remember why I wanted it originally.

Could you have posted just the schematic from the .circ in post #5?
Yes, I could look at a ring of 3 (etc) counter, thanks.

 

[Nigel Goodwin]

Sigh! "knack for puzzles" referred to the enjoyment of puzzling out the circuit!

There's no vagueness in its purpose - it's just something I've occasionally puzzled over, and finally ended up here. I don't remember why I wanted it originally.

Could you have posted just the schematic from the .circ in post #5?
Yes, I could look at a ring of 3 (etc) counter, thanks.

Yes I could, but if you click on the link you get the full information and explanation.

 

[crutschow]

For your amusement to puzzle out how it works, below is the LTspice sim of a NAND-latch based Radio PB circuit:
The SWs are NO PB switches.
The circuit is immune to switch-bounce.
Note that the output latches to its respective input, no matter the input sequence.

 

[AnalogKid]

What Nigel is referring to is called a game show circuit. You are after a variation of that, called, yes, a radio button circuit. There are many schematics for these on the innergoogle, and threads for both on other forums.

Here is one I posted on another forum. It uses a different approach that Carl's. Connecting C3 to any of the switch inputs makes that input default ON at power-on.

ak

 

[crutschow]

Here is one I posted on another forum.

I assume the purpose of C1 is to delay the clock until the D input has settled, but that seriously violates the MAX transition time for the clock (below), and could result in spurious operation of the FF.