MPLABX registering

Status
Not open for further replies.

99% of the problem is on the other side of the monitor screen with MPLABX.
Version 4.15 works like a charm on Linux for some very complex software projects.

I even have the MIPS bare-metal tool chain as a custom compiler in the IDE.
 
Last edited:
Mplab X works great the xc8 is great too just do the month to month thing when you need the full blown xC I saved my free shot with it.
But really the month to month is not that bad a deal for me cause I don't need the full xC only time has been with some USB stuff I wanted to use.

But on Linux Mplab X has been really good, And after getting the hang of IPE it works find with the 3 programmers I have.
Plus The Mplab express work fine too. Windows it's kind off slow on a four core AMD box . But my Linux Box is a 2 core AMD 64 bit there 3ghz 4 gig ram.
the 4 core is 64 bit 2.1 ghz 8 gig of ram I watch movies with it and code on Linux I use Swordfish on Linux too I works fine using IPE to load code But I can't run my full copy on there so I keep the windows open LOL.

As a side note I can code for AVR on MPlab X now too.

Plus the pic 32 is GCC which you can use it for free Got that added in too it's just a shame they bloat the xc8 running it free as much as they do looks like they would see that a free compiler
Like the AVR has would be a good idea but then they own AVR now to go figure.

99% of the problem is on the other side of the monitor screen with MPLABX.
I really have to say that's right cause it's been hard getting the hang of Mplab x lots of there samples and even the learning samples on the Microchip's Dev site is old and dated.
It just doesn't match the newer ide name changes and how it saves stuff. But after you get the hang of it The Ide is great. Way better then 8.92 I think I hated 8.92
 
Last edited:
99% of the problem is on the other side of the monitor screen with MPLABX. Version 4.15 works like a charm on Linux
That may well be true of linux, but on windows 99% of the problem is on the INSIDE of the monitor screen. Some features work fine, while others work randomly, if at all.

As I mentioned, I don't have a single setup where the programmers/debuggers work reliably, while under MPLAB 8.92 they all work... PK2/PK3/ICD3/REALICE.

Perhaps it's my expectations... I don't consider having to unplug/replug usb devices multiple times/shutdown MPLABX/reboot machine/stand on one foot while crossing my fingers and making secret incantations "reliable operation". Some versions of MPLABX are better than others, but they keep changing things so it's not as simple as "newer is better".

I've used all these same tools for eons and only have problems with MPLABX.
 
Just for info, I'm presently using MPLABX (4.15) with ICD3 on a couple of DSPIC33-based projects and it's not given me any problems at all.

I do use it with the CCS compilers though; I don't know how much difference that may make.

(On a machine running Win 7 Pro x64).
 
Well mint is 1.8 gigs and the old laptop i want to put it on only has a cd drive!! So need to find a way to get it on a old blank laptop, need to think about it in the morning as i am really tired
 
LG Had the same trouble with the vintage Presario , fortunately it will boot from USB , I have X 4.10 XC8 1.45 and XC16 1.3x with PK3 running on it and have very little issues . whereas X4.10 on win 7 PC needs coaxing all the time...
 
I managed to get it booted from USB, the laptop has the security setting to lock the bios out. By pure luck the USB port boots first!! So now got cinnamon running on it, i should have gone with a lighter version really. I should get mplab etc on it by end of weekend, its taken ages getting some the stuff updated and some the other programs i need on it working.

First impression of mint is i like it, diferent from ubuntu but kind of the same also, bit like the unholy love child of win xp and ubuntu lol
 
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…