HI,
Thanks For Your Reply Yes I got is the code was really too large i wrote that for pic18f452 and then converted that for pic12f675 now there isn't ny errors while building that code.
here is another problem i am facing i don't know whats happening none of my code is running now each time i write in Hi-Tech C using MPlab V8.33 it was working yesterday but dont know what happened to the code now i am just trying to light and led connected to GPIO5.
I tried a lot but nothing is happening on the other hand when i try usnig mikroc it works fine.
here is my code
#include<htc.h>
__CONFIG(FOSC_INTRCIO & WDTE_OFF & PWRTE_ON & MCLRE_OFF & BOREN_OFF & CP_OFF & CPD_OFF);
#define _XTAL_FREQ 4000000
/************************************/
void main()
{
ANSEL = 0x00; // Set ports as digital I/O, not analog input
ADCON0 = 0x00; // Shut off the A/D Converter
CMCON = 0x07; // Shut off the Comparator
VRCON = 0x00; // Shut off the Voltage Reference
TRISIO = 0x08; // GP3 input, rest all output
GPIO = 0x00; // Make all pins 0
while(1)
{
GP5=1;
}
}
....
here is the view of pic memory....why my code is too long using mplab and when using mikroc its just 3 or 4 lines of memory...