Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Manuals for an old Advance Instruments scope?

Status
Not open for further replies.

Well Cookin

New Member
I have an old Advance Instruments Oscilloscope OS-2100. I have the 'Main Frame' manual but none for the plug-in modules: OS-2007-Y and 0S-2005-AX.

Can anyone help me find manuals for the plug-ins please?

Thanks and regards,
Well Cookin'
 
I emailed a load of sites and got some useful feedback. Those of you who are looking for manuals should try these:

**broken link removed**

**broken link removed**

I can't say how good their services are because I haven't ordered from them yet.
 
I've just started in the instrumentation section of my company - I'll have a dig in the technical files, tomorrow, to see if we have it. IF (no promises...) we have it, I can email it to you (PDF).
 
Anchors Away !

Copied from http://groups.yahoo.com/group/euro_ba_swap/message/278

From: "JOSE V. GAVILA (EB5AGV/EC5AAU)" <eb5agv@c...>
Date: Thu Sep 9, 1999 9:40 am
Subject: [euro_ba_swap] Advance Instruments OS-2100 oscilloscope

ADVERTISEMENT

Hi gang,
Some months ago, I got an OS-2100 oscilloscope, made by 'Advance
Instruments' in the UK about 20 years ago. It is big, modular (with
plug-ins) and weights a lot, so I think it qualifies as a BA (and HAS a big
tube, hi!). And, in fact, it is used to fix BAs ;-)

I got it as a surplus from my employer, as it was going to be trashed 8-( .
I cleaned it and fixed a trouble with the brightness, as it was always at
maximum, regardless of control position. It happened to be a bad 1uF/600V
capacitor. Once changed, the unit worked fine.

I was able to get a poor manual copy from a dealer in England, but I would
like to get a better copy... any available?

I am also looking for other plug-ins for this oscilloscope. Currently, I
have the 30MHz plug-in (I can't recall the reference from memory now).

BTW, I wonder if there is any user of this oscilloscope brand around...
Perhaps I am alone :)!

Best regards,

JOSE
------------------------------------------------------------
73 EB5AGV / EC5AAU
JOSE V. GAVILA
Benetusser - VALENCIA (SPAIN)

** VISIT MY VINTAGE RADIO SITE - updated 11-July-1999 ***
http://www.geocities.com/SiliconValley/6992/
EuroBA eGroup: http://www.eGroups.com/list/euro_ba_swap
ICQ 43817777
It could be a line worth following ...
ps. BA = boat anchor :wink:
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top