I want to electrolyze water into its constituent gases. Do I need DC or can I use AC if I just want the mixture? If I could use line voltage with a current limiting resistor, that would be great. If I use a DC power supply (I have a 12V 25A switcher with some adjustment range) what do I want the float voltage to be if I use an LM317 as a current source? (ie reaction voltage + 2.5V + 1.25V).
Some drain cleaners are not just NaOH. Many contain agents to make them bubble, which is probably more marketing than science. The label often does not reveal the other agents. You can buy NaOH and KOH on the Internet cheaply from the suppliers for biodiesel.
Some drain cleaners are not just NaOH. Many contain agents to make them bubble, which is probably more marketing than science. The label often does not reveal the other agents. You can buy NaOH and KOH on the Internet cheaply from the suppliers for biodiesel.
Aluminum is amphoteric and reacts with both acids and bases. It can react with NaOH to give hydrogen and aluminum hydroxide. The can hydrogen exert a lot of pressure, but if you hit it with a match, it is even more spectacular.
It just creates a gas and causes the plastic container to burst. I'd expect the gas to be nothing less than single isotope diatomic HHO cold fusion energy cell that can be used for an infinite future power plasmonic damager source. Sorry I had to.
It just creates a gas and causes the plastic container to burst. I'd expect the gas to be nothing less than single isotope diatomic HHO cold fusion energy cell that can be used for an infinite future power plasmonic damager source. Sorry I had to.