Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have seen pictures of Atom's work, I think he is capable, but that is a good tip for all the rest.Soldering wire to an SMD is rather tricky. You need a low power, pointed tip iron, and a steady hand. Be sure and tin the lead first and put a little rosin flux on the wire and SMD lead before soldering.
You can solder it but you will have to scrape off the coating. I would not trust the coating as an insulator around anything that could potentially conduct electricity though. It is not like regular insulation on other wire.
I disagree about not trusting it, enameled coated magnet wire is what every motor and transformer uses and the insulation and temperature requirements for those applications makes it a proven and reliable wire.
Lefty
...Treating it as bare wire is a good precaution to take considering the use in this application, don't you think?
In what way ?No, its tough as nails, and 100 times better than wire-wrap wire...