Lt spice bode plot phase axis

[dr pepper]

I used info from this url https://www.analog.com/en/technical...-steps-in-generating-a-bode-plot-of-smps.html
So i can plot the gain & phase of an smps, or other circuit for that matter.
I got it to work, but unlike the url my plot doesnt show phase in degrees, my vertical axis shows K, 0.5K at the bottom and 1K at the top.
I presume 1K is 360 degrees.
Can I force Ltspice to show degrees?

 

[unclejed613]

if i'm guessing correctly, isn't that the point on the .measure statements that end with "sin(360*time*freq)" and "cos(360*time*freq)" ??

 

[alec_t]

I presume 1K is 360 degrees.

I would assume 1k is 1000dB if on the left-hand vertical axis, or 1000Hz if on the horizontal axis.

 

[dr pepper]

Yes unc.
Looking closer the right axis shows K then a degrees symbol, so it is phase, I dont think it'd be a 1000 degrees, K might mean constant.

 

[crutschow]

Post a clip of your results.