Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Looking for some suggestions LED sequencer and gong

Status
Not open for further replies.

Gerald Sachs

New Member
I would like a curcuit board designed to sequence 10 to 12 LEDs when a touch switch is activated. When the last LED is lit i would like the design to ring an electronic bell 1 time. The bell sound I am looking for should be a gong like that in a boxing ring. The unit needs to be battery operated. Battery size doesn't matter. Unit also needs to have a manual on/off switch when not in use.

Thanks in advance :)

I would like to hire someone qualified to do this design work.
sachs@tampabay.rr.com
 
I think you could use a 4017 decade counter and the last LED makind a paralel conection to a relay for switching the bell, the on/ff switch would be think so in the pin clock of the 4017
 
Hi mettula
The 4017 sound ok, but I still need a touch switch, A switch activated by touch. Will also need not a mechanical bell, but an electronic bell built into circuit. 1 loud gong at end of sequence. Thanks in advance.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top