linx TXE / RXD connection with PIC

i want to connect my RF ic's with PIC
i have TXE-433-kh2 from linx connected with pic 18f452 and RXD-433-kh2 with pic 16877a.
i want to transmit sensor information from transmitter to receiver via wireless linx IC's
the baud that i used is 9600bps (im confused what is the true data rate is 9600 bps or 4800bps???) ...........my lcd screen dont type any thing .
but when connect two pic's by a wire .....the lcd screen type every thing correctly
so the problem in TX/RX............but i dont know what the error in my connection.
or may be the error in pic c code.
so plz can you help me with connection pic with TX/RX
here is my connection on the trnsmitter:

**broken link removed**

plz is it true or may need some modification.

here is the code of the pic 18f452

**broken link removed**

this is the code of 16f877a

**broken link removed**

i dont know whats is the problem >>>plz help me

Please include the schematics and such in the post. Few people will want to hassle with going to another site to get images and code. Esp one that makes you wait 20 seconds to download.

Those modules may have problems with a standard NRZ serial data stream. You should be using Manchester encoding.