i have a rotary servo motor of type **broken link removed** and want to convert it to linear so that i have this kit **broken link removed** but i didn't find any information of how to use it? so does any one use it before? or couls you please provide for me links so that i can read them?
Installation appears straight forward.
Take off top of servo case. Replace with new top from kit. Adjust horn replacement until centered.
Installing it shouldn't be an issue.
The real issue is that in the tech notes on Tower Hobbies clearly states the kit is for an S148 Futaba servo while you linked to an S3003 Futaba servo.
If these links are accurate to what you bought, you may not be able to even use the kit.
Installation appears straight forward.
Take off top of servo case. Replace with new top from kit. Adjust horn replacement until centered.
Installing it shouldn't be an issue.
The real issue is that in the tech notes on Tower Hobbies clearly states the kit is for an S148 Futaba servo while you linked to an S3003 Futaba servo.
If these links are accurate to what you bought, you may not be able to even use the kit.