Greetings
I have a dead PS from a LG and I ordered a new one
Turns out that the new PS has all the same connectors altho it is a different Part and a slightly different layout (only the final Letter Changes to E instead of A)
It is the closest one that is available in the market atm
The specs goes like this:
A Type - (6871TPT281A dead original)
AC INPUT: 100-240 Vac 50-60Hz 1A
DC OUTPUT: +5.1V/2.0A max ; +15V/0.6A max
800Vac/8.5mA Max
E Type - (6871TPT281E New Part)
AC INPUT: 100-240V 1A 50-60Hz
DC OUTPUT: +5.0V/2.0A max; +15.0V/0.2A max
Will the difference in Amps on the 15V be able to do some harm to the the Power Board?
Sorry for the basic question
Best regards in advance,
V.
I have a dead PS from a LG and I ordered a new one
Turns out that the new PS has all the same connectors altho it is a different Part and a slightly different layout (only the final Letter Changes to E instead of A)
It is the closest one that is available in the market atm
The specs goes like this:
A Type - (6871TPT281A dead original)
AC INPUT: 100-240 Vac 50-60Hz 1A
DC OUTPUT: +5.1V/2.0A max ; +15V/0.6A max
800Vac/8.5mA Max
E Type - (6871TPT281E New Part)
AC INPUT: 100-240V 1A 50-60Hz
DC OUTPUT: +5.0V/2.0A max; +15.0V/0.2A max
Will the difference in Amps on the 15V be able to do some harm to the the Power Board?
Sorry for the basic question
Best regards in advance,
V.
Last edited: