Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Kitchen timer problem

Status
Not open for further replies.

Cocopep

New Member
Hi all,
Total amateur here so please be patient.

I have a kitchen style timer, I use this to alert me when the immersion switch needs turned off so it’s not on for more than an hour.

When the timer counts down and the alarm beeps it goes off after a minute. So in other words i only have a minute in which to pick up on the alert. .

I’m hoping there is something I can do to set the alarm / beeper to stay on until the start/stop button is pressed.

I’ve attached some photos and any help would be greatly appreciated.
 

Attachments

  • D81F03C3-EDD6-4ED6-8EE7-65F1CC9C6E36.jpeg
    D81F03C3-EDD6-4ED6-8EE7-65F1CC9C6E36.jpeg
    1.4 MB · Views: 189
  • B5E0617A-DADC-43D1-806F-EB613700DFF3.jpeg
    B5E0617A-DADC-43D1-806F-EB613700DFF3.jpeg
    1.5 MB · Views: 185
  • 482609AA-638C-4DDE-B541-54AEE5985186.jpeg
    482609AA-638C-4DDE-B541-54AEE5985186.jpeg
    1.4 MB · Views: 186
  • 63923492-A081-480D-AC65-CF0DF9019FFF.jpeg
    63923492-A081-480D-AC65-CF0DF9019FFF.jpeg
    1.6 MB · Views: 184
  • B4E756BE-2928-41BD-9879-61CBDE16AAB9.jpeg
    B4E756BE-2928-41BD-9879-61CBDE16AAB9.jpeg
    1.5 MB · Views: 180
  • 12EF2F26-0407-4738-AB60-7497EC7596E6.jpeg
    12EF2F26-0407-4738-AB60-7497EC7596E6.jpeg
    1.7 MB · Views: 174
Totally get that but this is to sit above the immersion switch in the kitchen so my family/kids will all use it instead of a phone. Easier to remember to do it.
 
The black blob on the circuit board is the "brains" and totally encapsulated. Doubt you'll be able to modify anything unless the original design had that feature. Have you checked online for a user manual that might help?

Mike.
 
I don't like to be obvious - but why not put a timer on the heater itself?, or even better put a thermostat on the heater (which it should have anyway).

With a proper thermostat you don't need to do silly things like 'put it on for an hour', just switch it ON and forget about it - once it gets to temperature it will turn itself OFF, and then come back ON occasionally to maintain the temperature - oviously it needs to be well insulated, but again it should be anyway.

I ran a immersion heater like this for decades, (as millions do) and never had big bills.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top